Modding server 1U

   After a couple of hours of filing you can proceed to polishing of the face side. I did this with the help of emery disk and angle grinder.
    

   Such a refined deign is determined first of all by my conception of cooling. I remind you that it sounded as follows:” to make as less obstacles on the way of air current as possible”; second reason is presence of ready-made fasteners in the server case.
    

   Let’s pass to a more delicate operation. We must fix decorative grid. Each grid is fixed with six screws Ì1.5
    

   It’s not easy to thread 3 mm plate without a through hole; but if you have some practice you’ll manage to do it.
    

   The main ruse here is to sharpened end of the screw tap. I paste the screws with glue to fix them firmly.